Projectors: Difference between revisions
(Created page with "This page covers data projectors. ==Summary== Data projectors are often quite expensive items and so well worth fixing when they go wrong. With care, disassembly and fixing a...") |
|||
| Line 10: | Line 10: | ||
==How projectors work== | ==How projectors work== | ||
There are two basic types of projector: DLP and LCD. Except for pocket-size projectors, they almost invariably use a discharge tube as the light source. | |||
===DLP projectors=== | |||
DLP ([[wikipedia:Digital_Light_Processing|Digital Light Processing]]) projectors are probably the commonest. The image is created by a [[wikipedia:Digital_micromirror_device|digital micromirror device]] (DMD) fabricated on a silicon chip. Ech pixel is controlled by a tiny mirror which can be electrically deflected to reflect light either through the lens and on to the screen, or into a "light sink" where it is absorbed. By oscillating between the two states at high speed and spending more or less time in one than the other, the apparent brightness of the pixel can be controlled. | |||
The DMD is essentially a monochrome device. A colour image is produced by a colour wheel in front of the lamp which passes each of the three primary colours in turn. The DMD then creates each of the red, green and blue fractions of the image, one after the other. If you sweep your gaze rapidly across the screen you will see the red, green and blue images separating. Some people find this distracting, and is sometimes cited as a disadvantage of DLP projectors. | |||
In passing only one colour at a time the colour wheel rejects two thirds of the light. High end home theatre and event projectors sometimes have 3 DMD chips. The light from the lamp is split into red, green and blue beams which are focussed onto the 3 DMD chips before being recombined into a colour image for projection onto the screen. | |||
===LCD projectors=== | ===LCD projectors=== | ||
| Line 19: | Line 23: | ||
===Lamps=== | ===Lamps=== | ||
==Diagnosis and fixing== | ==Diagnosis and fixing== | ||
Revision as of 14:35, 16 June 2017
This page covers data projectors.
Summary
Data projectors are often quite expensive items and so well worth fixing when they go wrong. With care, disassembly and fixing are not generally too difficult, but an understanding of their principles will help.
Safety
- Projector lamps get extremely hot. Always leave a projector to cool down for 30 - 45 minutes before working on it, so as to avoid the risk of burns.
- Take great care not to touch any of the glass of a projector lamp as finger grease can shorten its life, and in the worst case, cause it to explode.
How projectors work
There are two basic types of projector: DLP and LCD. Except for pocket-size projectors, they almost invariably use a discharge tube as the light source.
DLP projectors
DLP (Digital Light Processing) projectors are probably the commonest. The image is created by a digital micromirror device (DMD) fabricated on a silicon chip. Ech pixel is controlled by a tiny mirror which can be electrically deflected to reflect light either through the lens and on to the screen, or into a "light sink" where it is absorbed. By oscillating between the two states at high speed and spending more or less time in one than the other, the apparent brightness of the pixel can be controlled.
The DMD is essentially a monochrome device. A colour image is produced by a colour wheel in front of the lamp which passes each of the three primary colours in turn. The DMD then creates each of the red, green and blue fractions of the image, one after the other. If you sweep your gaze rapidly across the screen you will see the red, green and blue images separating. Some people find this distracting, and is sometimes cited as a disadvantage of DLP projectors.
In passing only one colour at a time the colour wheel rejects two thirds of the light. High end home theatre and event projectors sometimes have 3 DMD chips. The light from the lamp is split into red, green and blue beams which are focussed onto the 3 DMD chips before being recombined into a colour image for projection onto the screen.
LCD projectors
Lamps
Diagnosis and fixing
External links
- External links (if any) as bullet points.
- If non, delete this section.